Mezzanine Build Dream Shop Part 2 Reckless Wrench Garage

Mezzanine_Build_Dream_Shop_Part_2_Reckless_Wrench_Garage_01_ysuj

August 5, 2022 | Posted in mezzanine | By

Read More...

Simple Hacks For A More Organized Shop Garage

Simple_Hacks_For_A_More_Organized_Shop_Garage_01_kot

May 8, 2022 | Posted in simple | By

Read More...

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet

Large_Garage_Tool_Box_Workshop_Storage_Chest_Rack_Top_Bottom_Drawer_Shop_Cabinet_01_jf

January 21, 2022 | Posted in large | By

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Hyper Tough 20-In 5-Drawer Rolling Tool Chest & Cabinet Combo with Riser. Ball-Bearing Drawer Slides rated for 20 lb. Chest has 3 Drawers and flip-open top section. Cabinet has 2 Drawers and Bulk Storage Area behind 2 Doors. Riser provides additional 9.5 inches of storage height. Power Cord Knockout in top till. Cabinet has Pegboard Side Panels with 15 included Peg Hooks. Assembled Dimensions: 20 inches Wide x 11.6 inches Deep x 49.8 inches High. The Hyper Tough 20-Inch 5-Drawer Tool Chest and Cabinet Combo with Riser provides many great storage options. The top chest has three drawers and an accessible top tray. Inside the top tray is an electrical knockout that will allow you to run an electrical cord within. The lower section has two additional drawers and a bulk storage area with two doors for larger items. In between the two sections is a 9.5-inch riser that provides additional storage space. All drawers have ball-bearing drawer slides which allow them to open and close easily and effortlessly. The side panels of the lower section have pegboard holes in them to create quick access to frequently used tools. Fifteen peg hooks have been included with this unit. The entire chest and cabinet combo can move around your workspace on the four swivel casters. This item is in the category “Home & Garden\Tools & Workshop Equipment\Tool Boxes & Storage\Tool Boxes”. The seller is “aileestore” and is located in this country: US. This item can be shipped to United States.
  • Size: Large
  • Country/Region of Manufacture: United States
  • Item Height: 49.8 in
  • Item Width: 20 in
  • Material: Metal
  • Number of Items: 1
  • Type: Tool Box
  • Features: 4 Swivel Casters, Ball Bearing Slides
  • Color: Black
  • Number of Drawers: 5
  • Finish: Black
  • Item Deep: 11.6 in
  • Base Type: Casters
  • Shape: Rectangle
  • Manufacturer Color: Black
  • Item Weight: 50 lb
  • Brand: Unbranded

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet

Read More...

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet

Large_Garage_Tool_Box_Workshop_Storage_Chest_Rack_Top_Bottom_Drawer_Shop_Cabinet_01_moi

January 1, 2022 | Posted in large | By

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet
20-Inch 5-Drawer Tool Chest and Cabinet Combo with Riser provides many great storage options. The top chest has three drawers and an accessible top tray. Inside the top tray is an electrical knockout that will allow you to run an electrical cord within. The lower section has two additional drawers and a bulk storage area with two doors for larger items. In between the two sections is a 9.5-inch riser that provides additional storage space. All drawers have ball-bearing drawer slides which allow them to open and close easily and effortlessly. The side panels of the lower section have pegboard holes in them to create quick access to frequently used tools. Fifteen peg hooks have been included with this unit. The entire chest and cabinet combo can move around your workspace on the four swivel casters. Be sure to add this rolling tool storage combo to your workspace today! 20-In 5-Drawer Rolling Tool Chest & Cabinet Combo w/ Riser. Ball-Bearing Drawer Slides rated for 20 lb. Chest has 3 Drawers and flip-open top section. Cabinet has 2 Drawers and Bulk Storage Area behind 2 Doors. Riser provides additional 9.5 inches of storage height. Power Cord Knockout in top till. Cabinet has Pegboard Side Panels with 15 included Peg Hooks. Assembled Dimensions: 20 inches Wide x 11.6 inches Deep x 49.8 inches High. This item is in the category “Home & Garden\Tools & Workshop Equipment\Tool Boxes & Storage\Tool Boxes”. The seller is “baranbulut” and is located in this country: US. This item can be shipped to United States.
  • Brand: Unbranded
  • Type: Tool Box
  • Number of Drawers: 5
  • Size: Large
  • Material: Metal
  • Features: Adjustable, Deep Chest, Drawer Liner, Lockable, Magnetic
  • Number of Items: 1

Large Garage Tool Box Workshop Storage Chest Rack Top Bottom Drawer Shop Cabinet

Read More...

30×50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building

30x50_Steel_Building_SIMPSON_Garage_Storage_Kit_Shop_Metal_Building_01_uw

December 30, 2021 | Posted in 30x50 | By

30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building

30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
SIMPSON STEEL BUILDING COMPANY. Design: Steel Truss Design. Size: 30′ Wide 50′ Long. (options for height are at the top of the listing in the drop down menu). Ground Snow Load: 20 lbs per sq. Wind Load: 105 MPH. Roof Pitch: 3:12. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost. Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans. Custom designed around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel, cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Roofing panels are 26ga. 80,000 psi Galvalume+, which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvanized steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. Wall panels are 26ga. 80,000 psi painted galvanized steel. They are comprised of a modified silicone polyester paint applied over the top of already galvanized steel panels. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners. Roofing sidelaps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to “bird-proof” the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. EXTRA FEATURES AND AVAILABLE OPTIONS. 3″ or 6″ Insulation. 18 Overhang (1 end or both). 18 Overhang (1 side or both). Engineer Stamp on Drawings. Engineer Stamped Design Calculations. 3’x7′ Half Glass Door (Glass not included). 3’x7′ Slimline Glass Door (Glass not included). 3’x3′ Horizontal Sliding Window. 6’x3′ Horizontal Sliding Window. 3’x3′ Vertical Sliding Window. 3’x4′ Vertical Sliding Window. WHY SIMPSON STEEL TRUSS? We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20′ apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes “knocked down” and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Cost: Minimal compared to welded up I-Beam or Rigid Frames. Strength: Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Accessories: Complete line of accessories and options. Doors – Windows – Insulation – Overhang – Wainscot – Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company. Potential Steel Price Increases. Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases. This item is in the category “Business & Industrial\Modular & Prefabricated Buildings”. The seller is “simpsonsteelbldgs” and is located in this country: US. This item can be shipped to United States.
  • Model: 30x50x16
  • Country/Region of Manufacture: United States
  • Item Width: 30 ft
  • Material: Metal, Steel
  • Type: Garage
  • Features: Auto Shop, Car Garage
  • Building: Metal
  • Featured Refinements: Steel Building
  • MPN: 30×50
  • Building Type: Steel Truss Frame
  • Item Length: 50 ft
  • Brand: Simpson Steel Building
  • Square Footage: 1500 ft²

30x50 Steel Building SIMPSON Garage Storage Kit Shop Metal Building

Read More...

24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

24x24x12_Steel_Building_SIMPSON_Garage_Storage_Shop_Metal_Building_Kit_01_csi

December 26, 2021 | Posted in 24x24x12 | By

24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
SIMPSON STEEL BUILDING COMPANY. Design: Steel Truss Design. Size: 24 Wide 24 Long 12 Tall. Ground Snow Load: 20 lbs per sq. Wind Load: 105 MPH. Roof Pitch: 3:12. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost. Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans. Around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Accessories Walk doors Windows Insulation, etc. Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel. Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Roofing panels are 26ga. 80,000 psi Galvalume+. Which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvalume steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. Wall panels are 26ga. 80,000 psi galvalume steel. They are comprised of a modified silicone polyester paint applied over the top of already galvalume steel panels. There are 13 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners. Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to bird-proof the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. Please provide city, state and zip code during inquiry to confirm. EXTRA FEATURES AND AVAILABLE OPTIONS. 3 or 6 Insulation. 18 Overhang (1 end or both). 18 Overhang (1 side or both). Engineer Stamp on Drawings. Engineer Stamped Design Calculations. 3×7 Half Glass Door (Glass not included). 3×7 Slimline Glass Door (Glass not included). 3×3 Horizontal Sliding Window. 6×3 Horizontal Sliding Window. 3×3 Vertical Sliding Window. 3×4 Vertical Sliding Window. WHY SIMPSON STEEL TRUSS? We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20 apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes knocked down and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Minimal compared to welded up I-Beam or Rigid Frames. Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Complete line of accessories and options. Doors Windows Insulation Overhang Wainscot Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company. Potential Steel Price Increases. Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases. The item “24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit” is in sale since Saturday, December 7, 2019. This item is in the category “Business & Industrial\Modular & Prefabricated Buildings”. The seller is “simpsonsteelbldgs” and is located in Van Buren, Arkansas. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Item Height: 12
  • Item Width: 24
  • Material: Metal
  • Type: Garage
  • Features: Auto Shop
  • Model: Storage Building
  • Featured Refinements: Steel Building, Steel Building Kit, Garage
  • MPN: 24×24
  • Steel Building: Truss
  • Building: Metal Building Kit
  • Item Length: 24
  • Brand: Simpson Steel Building
  • Square Footage: 576

24x24x12 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

Read More...

40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit

40x75x12_Steel_Building_SIMPSON_Garage_Storage_Barn_Metal_Shop_Kit_01_hg

December 25, 2021 | Posted in 40x75x12 | By

40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit

40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit
SIMPSON STEEL BUILDING COMPANY. Design: Steel Truss Design. Size: 40 Wide 75 Long 12 Tall. Ground Snow Load: 20 lbs per sq. Wind Load: 105 MPH. Roof Pitch: 3:12. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost. Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. LEAN-TO AND WRAP AROUND PORCH NOT INCLUDED. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans. Around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Accessories Walk doors Windows Insulation, etc. Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel. Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Roofing panels are 26ga. 80,000 psi Galvalume+. Which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvalume steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. Wall panels are 26ga. 80,000 psi galvalume steel. They are comprised of a modified silicone polyester paint applied over the top of already galvalume steel panels. There are 13 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners. Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to bird-proof the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. Please provide city, state and zip code during inquiry to confirm. EXTRA FEATURES AND AVAILABLE OPTIONS. 3 or 6 Insulation. 18 Overhang (1 end or both). 18 Overhang (1 side or both). Engineer Stamp on Drawings. Engineer Stamped Design Calculations. 3×7 Half Glass Door (Glass not included). 3×7 Slimline Glass Door (Glass not included). 3×3 Horizontal Sliding Window. 6×3 Horizontal Sliding Window. 3×3 Vertical Sliding Window. 3×4 Vertical Sliding Window. WHY SIMPSON STEEL TRUSS? We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20 apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes knocked down and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Minimal compared to welded up I-Beam or Rigid Frames. Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Complete line of accessories and options. Doors Windows Insulation Overhang Wainscot Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company. Potential Steel Price Increases. Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases. The item “40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit” is in sale since Tuesday, June 9, 2020. This item is in the category “Business & Industrial\Modular & Prefabricated Buildings”. The seller is “simpsonsteelbldgs” and is located in Van Buren, Arkansas. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Item Height: 12
  • Item Width: 40 ft
  • Material: Metal
  • Type: Garage
  • Features: Auto Shop
  • Model: Storage Building
  • Steel Building: Truss
  • MPN: 40×75
  • Building: Metal Building Kit
  • Featured Refinements: Steel Building
  • Item Length: 75
  • Brand: Simpson Steel Building
  • Square Footage: 3000 ft²

40x75x12 Steel Building SIMPSON Garage Storage Barn Metal Shop Kit

Read More...

40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

40x50x14_Steel_Building_SIMPSON_Garage_Storage_Shop_Metal_Building_Kit_01_rqyi

December 24, 2021 | Posted in 40x50x14 | By

40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
SIMPSON STEEL BUILDING COMPANY. Design: Steel Truss Design. Size: 40 Wide 50 Long 14 Tall. Ground Snow Load: 20 lbs per sq. Wind Load: 105 MPH. Roof Pitch: 3:12. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost. Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans. Around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Accessories Walk doors Windows Insulation, etc. Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel. Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Roofing panels are 26ga. 80,000 psi Galvalume+. Which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvalume steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. Wall panels are 26ga. 80,000 psi galvalume steel. They are comprised of a modified silicone polyester paint applied over the top of already galvalume steel panels. There are 13 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners. Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to bird-proof the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. Please provide city, state and zip code during inquiry to confirm. EXTRA FEATURES AND AVAILABLE OPTIONS. 3 or 6 Insulation. 18 Overhang (1 end or both). 18 Overhang (1 side or both). Engineer Stamp on Drawings. Engineer Stamped Design Calculations. 3×7 Half Glass Door (Glass not included). 3×7 Slimline Glass Door (Glass not included). 3×3 Horizontal Sliding Window. 6×3 Horizontal Sliding Window. 3×3 Vertical Sliding Window. 3×4 Vertical Sliding Window. WHY SIMPSON STEEL TRUSS? We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20 apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes knocked down and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Minimal compared to welded up I-Beam or Rigid Frames. Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Complete line of accessories and options. Doors Windows Insulation Overhang Wainscot Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company. Potential Steel Price Increases. Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases. The item “40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit” is in sale since Tuesday, June 9, 2020. This item is in the category “Business & Industrial\Modular & Prefabricated Buildings”. The seller is “simpsonsteelbldgs” and is located in Van Buren, Arkansas. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Item Height: 14
  • Item Width: 40 ft
  • Material: Metal
  • Type: Garage
  • Features: Auto Shop
  • Featured Refinements: Steel Building, Steel Building Kit, Garage
  • Steel Building: Truss
  • MPN: 40×50
  • Building: Metal Building Kit
  • Model: Storage Building
  • Item Length: 50 ft
  • Brand: Simpson Steel Building
  • Square Footage: 2000 ft²

40x50x14 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

Read More...

40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building

40x100x16_Steel_Building_SIMPSON_Garage_Storage_Kit_Shop_Metal_Building_01_st

December 22, 2021 | Posted in 40x100x16 | By

40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building

40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building
SIMPSON STEEL BUILDING COMPANY. Design: Steel Truss Design. Size: 40 Wide 100 Long 16 Tall. Ground Snow Load: 20 lbs per sq. Wind Load: 105 MPH. Roof Pitch: 3:12. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost. Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans. Around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Accessories Walk doors Windows Insulation, etc. Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel. Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Roofing panels are 26ga. 80,000 psi Galvalume+. Which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvalume steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. Wall panels are 26ga. 80,000 psi galvalume steel. They are comprised of a modified silicone polyester paint applied over the top of already galvalume steel panels. There are 13 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners. Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to bird-proof the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. Please provide city, state and zip code during inquiry to confirm. EXTRA FEATURES AND AVAILABLE OPTIONS. 3 or 6 Insulation. 18 Overhang (1 end or both). 18 Overhang (1 side or both). Engineer Stamp on Drawings. Engineer Stamped Design Calculations. 3×7 Half Glass Door (Glass not included). 3×7 Slimline Glass Door (Glass not included). 3×3 Horizontal Sliding Window. 6×3 Horizontal Sliding Window. 3×3 Vertical Sliding Window. 3×4 Vertical Sliding Window. WHY SIMPSON STEEL TRUSS? We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20 apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes knocked down and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Minimal compared to welded up I-Beam or Rigid Frames. Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Complete line of accessories and options. Doors Windows Insulation Overhang Wainscot Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company. Potential Steel Price Increases. Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases. The item “40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building” is in sale since Saturday, December 7, 2019. This item is in the category “Business & Industrial\Modular & Prefabricated Buildings”. The seller is “simpsonsteelbldgs” and is located in Van Buren, Arkansas. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Item Height: 16
  • Item Width: 40 ft
  • Material: Metal
  • Type: Garage
  • Features: Auto Shop
  • Model: Storage Building
  • Steel Building: Truss
  • MPN: 40×100
  • Building: Metal Building Kit
  • Featured Refinements: Steel Building
  • Item Length: 100
  • Brand: Simpson Steel Building
  • Square Footage: 4000 ft²

40x100x16 Steel Building SIMPSON Garage Storage Kit Shop Metal Building

Read More...

50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

50x100x16_Steel_Building_SIMPSON_Garage_Storage_Shop_Metal_Building_Kit_01_ua

December 17, 2021 | Posted in 50x100x16 | By

50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit
SIMPSON STEEL BUILDING COMPANY. Design: Steel Truss Design. Size: 50 Wide 100 Long 16 Tall. Ground Snow Load: 20 lbs per sq. Wind Load: 105 MPH. Roof Pitch: 3:12. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost. Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an. Erection manual, easy to read drawings, and Anchor Bolt Plans. Around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Accessories Walk doors Windows Insulation, etc. Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel. Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Roofing panels are 26ga. 80,000 psi Galvalume+. Which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvalume steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. Wall panels are 26ga. 80,000 psi galvalume steel. They are comprised of a modified silicone polyester paint applied over the top of already galvalume steel panels. There are 13 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners. Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to bird-proof the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. Please provide city, state and zip code during inquiry to confirm. EXTRA FEATURES AND AVAILABLE OPTIONS. 3 or 6 Insulation. 18 Overhang (1 end or both). 18 Overhang (1 side or both). Engineer Stamp on Drawings. Engineer Stamped Design Calculations. 3×7 Half Glass Door (Glass not included). 3×7 Slimline Glass Door (Glass not included). 3×3 Horizontal Sliding Window. 6×3 Horizontal Sliding Window. 3×3 Vertical Sliding Window. 3×4 Vertical Sliding Window. WHY SIMPSON STEEL TRUSS? We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20 apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes knocked down and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Cost: Minimal compared to welded up I-Beam or Rigid Frames. Strength: Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Accessories: Complete line of accessories and options. Doors Windows Insulation Overhang Wainscot Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company. Potential Steel Price Increases. Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases. The item “50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit” is in sale since Saturday, December 7, 2019. This item is in the category “Business & Industrial\Modular & Prefabricated Buildings”. The seller is “simpsonsteelbldgs” and is located in Van Buren, Arkansas. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Item Height: 16
  • Item Width: 50 ft
  • Material: Metal
  • Type: Garage
  • Features: Auto Shop
  • Model: Storage Building
  • Building Type: Steel Truss Frame
  • MPN: 50×100
  • Building: Metal
  • Featured Refinements: Steel Building
  • Item Length: 100
  • Brand: Simpson Steel Building
  • Square Footage: 5000 ft²

50x100x16 Steel Building SIMPSON Garage Storage Shop Metal Building Kit

Read More...